spherical roller bearings
spherical roller bearings
Author :Admin | Publish Date:2013-05-28 17:27:45
spherical roller bearings and rod ends bearing have a variety of designs
and different sliding contact surface combinations. Each design and conbination
has unique performance,enable it suitable for certain applications.
Including the following types:
Need to be maintained joint bearing
Maintenance-free Spherical roller bearings
Need to maintain the rod ends bearing
Maintenance-free rod ends bearing
spherical roller bearings have an inner ring with a convex sphered outside
surface and an outer ring with a correspondingly sphered but concave inner
surface. They are particularly suitable for bearing arrangements where alignment
movements between shaft and housing have to be accommodated or where recurrent
tilting or oscillating movements must be performed at relatively slow sliding
velocities. Spherical roller bearings are produced with different sliding
contact surfaces combinations, the sliding surfaces of the inner and outer rings
are made of different materials. There are two main groups: steel-on-steel
spherical roller bearings and maintenance-free spherical roller bearings.
Maintenance-free spherical roller bearings incorporate special sliding layers or
liners of wear-resistant materials. They are used for applications where
maintenance-free operation is required, where the use for application is
required, where the use of lubricants is not permitted (e.g. in the food
industry), or where the application is such that under the actual operating
conditions lubrication is inadequate or even lacking, making the use of
steel-on-steel bearings inadvisable. Maintenance-free nsk bearings are primarily intended for the accommodation of
heavy loads acting in a constant direction. They have only limited ability to
take up alternating loads.
spherical roller bearings are manufactured in a wide variety of materials
and are designed to offer bearing solutions in almost any operating environment.
SRG Bearings offers a complete line of Spherical Plain Bearings available in
inch and metric. These High-Quality Spherical roller bearings are suitable for
heavy-duty, off-highway vehicles, agricultural equipment, construction and
mining and logging equipment, packaging and textile equipment, and robotics. The
plain bearings come in standard industrial bore sizes from 0.5" to 12" inches,
as well as metric sizes from as small as 4 to 300 mm. Custom sizes can also be
ordered.
spherical roller bearings (also known as “Spherical Plane Bearings”
"Spherical Ball Bushing nachi Bearings and
“Ball Bushings”) have an inner ring with a sphere convex outside surface and an
outer ring with a correspondingly sphere, but concave inside surface. Their
design makes them particularly suitable for bearing arrangements where alignment
movements between shaft and housing have to accommodate, or where oscillating or
recurrent tilting movements must be permitted at relatively slow sliding
speeds.
[spherical roller bearings] and rod ends are produced in
various designs and with various combinations of sliding contact surfaces. Each
design and combination has characteristic properties which make it particularly
suitable for certain applications.
BRING SKF 6405 ( 25 X 80 X 21)
BRING SKF 6407 ( 35 X 100 X 25)
BRING SKF 6409 ( 45 X 120 X 29)
Prev:spherical roller bearings Next:bicycle bearings